Auto101;bumper

 A bumper is a structure attached to or integrated with the front and rear ends of a motor vehicle, to absorb impact in a minor collision, ideally minimizing repair costs. Stiff metal bumpers appeared on automobiles as early as 1904 that had a mainly ornamental function.Numerous developments, improvements in materials and technologies, as well as greater focus on functionality for protecting vehicle components and improving safety have changed bumpers over the years. Bumpers ideally minimize height mismatches between vehicles and protect pedestrians from injury. Regulatory measures have been enacted to reduce vehicle repair costs and, more recently, impact on pedestrians.


PHYSICS

Bumpers offer protection to other vehicle components by dissipating the kinetic energy generated by an impact. This energy is a function of vehicle mass and velocity squared. The kinetic energy is equal to 1/2 the product of the mass and the square of the speed. In formula form:


k= 1/2mv^2

A bumper that protects vehicle components from damage at 5 miles per hour must be four times as tough as a bumper that protects at 2.5 miles per hour, with the collision energy dissipation concentrated at the extreme front and rear of the vehicle. Small increases in bumper protection can lead to weight gain and loss of fuel efficiency.


Until 1959, rigidity was seen as beneficial to occupant safety among automotive engineers. Modern theories of vehicle crashworthiness point in the opposite direction, towards vehicles that crumple progressively. A completely rigid vehicle might have excellent bumper protection for vehicle components, but would offer poor occupant safety.

HISTORY

Bumpers were, at first, just rigid metal bars. George Albert Lyon invented the earliest car bumper. The first bumper appeared on a vehicle in 1897, and Nesselsdorfer Wagenbau-Fabriksgesellschaft, an Austrian carmaker, installed it. The construction of these bumpers was unreliable as they featured only a cosmetic function. Early car owners had the front spring hanger bolt replaced with ones long enough to attach a metal bar.G.D. Fisher patented a bumper bracket to simplify the attachment of the accessory.The first bumper designed to absorb impacts appeared in 1901. It was made of rubber, and Frederick Simms gained a patent in 1905.u


Comments

Post a Comment

Popular posts from this blog

Auto101; Pillars

Image
 The pillars on a car with permanent roof body style (such as four-door sedans) are the vertical or nearly vertical supports of its window area or greenhouse—designated respectively as the A, B, C and (in larger cars such as 4-door station wagons and sport utility vehicles) D-pillar, moving from front to rear, in profile view. NOMENCLATURE: Car pillars are vertical or inclined components of an enclosed automobile's body that both support its roof and reinforce the torsional rigidity of the body. An alphabetical convention for designating a car's pillars has developed over time, used variously by the automotive press in describing and reviewing vehicles, insurance companies in identifying damaged components, and first-responder rescue teams to facilitate communication, as when using the jaws of life to cut their way into a wreck. The letters A, B, C, and D are used (in upper case): The A-pillar is the forward-most pillar on a vehicle, supporting its roof at each corner of the wi
Read more

Auto101; Fascia

Image
 Fascia (/ˈfeɪʃə/) is a term used in the automotive world that refers to the decorative panels of a car's dashboard or the dashboard assembly. Regulations affecting bumper design in the late 1970s saw the increasing use of soft plastic materials on the front and rear of vehicles. Fascia was adopted then as the term to describe these soft areas, but is now increasingly used as a general term for a car's set of front-end components: grille, headlamps, front bumper, and other details. A bumper valance panel, a piece that is mounted on top of the bumper, or is right under it, is also considered a part of the vehicle's fascia. Carmakers often design the body panels that form the nose of their vehicles to have a unified look across their model design The word comes from the Italian word fascia (pronounced [ˈfaʃʃa]), meaning stripe.
Read more

Auto 101; spoiler

 A spoiler is an automotive aerodynamic device whose intended design function is to 'spoil' unfavorable air movement across the body of a vehicle in motion, usually manifested as lift, turbulence, or drag. Spoilers on the front of a vehicle are often called air dams. Spoilers are often fitted to race and high-performance sports cars, although they have become common on passenger vehicles as well. Spoilers are added to cars primarily for styling purposes and either have little aerodynamic benefit or even worsen the aerodynamics. The term "spoiler" is often mistakenly used interchangeably with "wing". An automotive wing is a device designed to generate downforce as air passes around it, not simply disrupt existing airflow patterns. As such, rather than decreasing drag, automotive wings actually increase drag. OPERATION Since spoiler is a term describing an application, the operation of a spoiler varies depending on the particular effect it is trying to spoil.
Read more